The Totem Sttaf is a journey into spatial sonority. Affordable and adaptable, the Sttaf is a multi-functional speaker system that goes beyond established standards. With the Sttaf, any kind of music is presented beautifully and honestly with amazingly true bass extension, foundation and substance. Its energetic, harmonious behavior makes it a distinctive choice for the seasoned ears.
The Sttaf’s proportions, cabinetry and classical elegance make for easy placement in any room environment. Huge, large-gauge, air core coils in the crossover guarantee that the speaker will never saturate in critical vocal and high-definition areas. Adaptable and easy to use with many affordable stereo and A/V electronics, the Totem Staff shines freely in every musical performance.
- Ultra slim design and aesthetic compactness
- Multi-layered frequency extension
- Flexible installation close to back walls
- Smooth tonal balance and harmonic coherence
- Extremely wide imaging capability
- Great bass extension and phase correctness
- Full mono-shell hand-assembled chassis
- Interlocking mitered joints
- Ultra-expansive borosilicate damping
- Ultra sophisticated, exclusive, hard-wired crossover
|Break in time:
||60 - 80 hours
|Placement from rear wall:
||1' - 4' / 304 - 1,219 mm
|Placement distance apart:
||4' - 10' / 1 219 - 3,048 mm
||2,3 - 4,5 kg / 5 - 10 lb
in each cabinet
||<39 Hz - 22 kHz ± 3 dB
||20 - 100 W
||2.5 kHz, 2nd order
||5.5" / 140 mm long throw
||1" / 25 mm textile dome
||In average size listening room
(12' x 20' / 4 m x 6 m)
103 dB peak
(12' x 15' / 3,658 x 4,572 mm)
from pair at 7' / 2 m
|Dimensions (w x h x d):
||6.3 x 33.5 x 9.5"
160 x 850 x 242 mm
The speakers require several hours of actual music playing time as a minimal break-in period. During this time, refrain from playing them at very loud levels. You will notice a definite gradual improvement in the cohesiveness of the music reproduction as this occurs.
It is only through the support of advocates such as yourself that true sound can be promoted...
Mass Loading: All Totem columns work very well without any type of mass loading. However if stability is an issue or if there is a particular over emphasis in the bass in the room they are used in, then mass loading can be experimented with. Variables such as electronics, wiring and room dynamics play a definite role and therefore the option is there for your experimentation. One may use: clean dry sand,silica sand, dry particulate matter or non-odor kitty litter.
Toe-in: Due to the fact that all Totem speakers have great off-axis dispersion, toe-in is generally not needed. Imaging will therefore be more stable from any point in the room. If the speakers are placed very far apart (over 7 feet) then a slight toe-in may be experimented with. However if room geometry does not permit a straight-ahead aspect they will also perform very well with a slight toe-in.